Charging the Battery

• connect the battery to the AC/DC charger and plug the charger into any standard electrical outlet
• the battery must continuously charge for a minimum of four hours during its initial charge
• the LED light on the charger will indicate red when the battery is being charged and will indicate green once the batteries are fully charged
• the battery/controller unit will display the actual battery charge status using numeric digits 0-9
• 0 – Completely Discharged, 9 – Fully Charged  

Battery Specifications
Voltage	7.4V
Capacity	4400mAh
Input	DC8.4V 1200mA
Output	Max 15W
Output LED Settings	1-5 (low-high)
Resistance Load	4Ω - 100 Ω
Efficiency of Output Power	> = 98%
Charge LED Settings	0-9 (empty-full)
Expected Battery Life	700 charge cycles
Approvals	CE, TUV, UL, CCC
Country of Origin Jacket Only Not Batttery	U.S.A. Made Jacket - Battery Imported

 

---

Connecting the System

• Once fully charged, insert the battery/controller into the reinforced battery pocket (front, lower, inside, left hand side)
• Insert the InfraRed Heating Elements into the internal pockets and close using hook/loop closure (the front right element will need to slide through the back pocket in order for all the heating elements to fit properly.) 
• Connect the InfraRed Heating Element wire into the battery/controller unit

• Push the “ON” button on the battery/controller for 1 second to turn on the system
• Adjust the temperature settings by pressing the “UP” and “DOWN” arrows
• Temperature specifications are as follows:

Please Note:  Other heated jackets on the market most likely will not let you adjust the temperature.  This one does!! 

• To turn the battery/controller off, press the "OFF" button for 2 seconds

Re-charging the Battery

• Remove the battery from the vest, connect it to the AC/DC charger and plug the charger into any standard electrical outlet
• Charging is complete once the LED indicates green

---

 Washing

• To wash this product, remove the battery/controller unit and InfraRed Heating Elements from the garment
• Machine wash the jacket (garment only) and dry on low heat
• To clean the InfraRed Heating Elements and battery/controller unit, wipe with a dry cloth

Purchase a converter kit for this jacket that will allow you to connect it directly to a 12 Volt battery.  Great for long motorcycle rides!!

---

  

Size	Chest (Inches)
Small	37" - 40"
Medium	40" - 43"
Large	43" - 45"
X-Large	45" - 48"
2X-Large	48" - 52"
3X-Large	52" - 55"

---

Black softshell upper portion of the jacket and soft durable 100% polyester fleece bottom with black poly cotton elastic trim.

• High collar, handy zippered front pockets, tie string at bottom and zipper clousre, sleeves for extra warmth.
• Please Note:  This item will not ship until 5-7 days after you place the order they are manufactured (sewn in the U.S.A) after your order is placed.